Holographic Pigment KolorPearl - Silver 10g 35 micro - Ultra-Fine Powder

Parameters:

• Holographic pigment for making holographic paint
• Size: 35 micro
• Quantity: 10 grams
• Mixing: Max. 25 grams / liter of thinned basecoat

The holographic pigment is mixed with a clear coat or a transparent basecoat. It can be applied in multiple layers. A longer flash-off time is needed between each layer. A black base is typically used underneath the holographic pigment to make the effect stand out the most. You can view the photo gallery here.

Preparation and Spraying Process:

The process of applying holographic pigment involves mixing it with a clear base and then applying this mixture to a solid base color. Spray in thin, even layers using a spray gun with a recommended nozzle of 0.8 - 1.7 mm (depending on the pigment size). After the desired coverage and curing of the layers are achieved, the surface is protected with additional layers of clear coat to create a deep, glossy, and shimmering effect. Proper surface preparation and a consistent spraying technique are essential for a successful and uniform application.

1. Surface Preparation:

• Sand the base coat - substrate: For a new application, first apply a primer or base color. If you are spraying on an already painted surface, sand it with 240 grit sandpaper so that the new layer with the holographic pigment adheres better.
• Clean the surface: Before applying any paint, make sure the surface is clean and dust-free. Degrease it with a silicone remover.

2. Mix the Paint and Pigment:

• Mix the components: In a container or disposable cup, mix the holographic pigment with a clear base or clear coat. Follow the specific instructions in the clear base or clear coat's technical data sheet, as the holographic pigment ratio may vary.
• Add thinner or hardener: After mixing the holographic pigment with the clear base, add thinner in the required ratio. After mixing with clear coat, add hardener and thinner in the required ratio to achieve the correct consistency for the spray gun.
  Ensure uniform distribution: Mix the mixture thoroughly to ensure the holographic pigment is evenly dispersed throughout.

3. Spraying the Holographic Pigment Layer:

• Use the right equipment: A spray gun with a suitable nozzle size is needed (0.8 - 1.7 mm, depending on the pigment size).
• Layered application: We recommend doing test sprays before the first application. For direct application, apply thin, evenly overlapping layers. The first layer may only provide partial coverage. Use 3 to 7 layers, depending on the desired final effect. Adhere to the flash-off times between layers according to the instructions in the technical data sheet.
• Shake the gun while spraying: Regularly shake the spray gun or paint cup to prevent the holographic pigment from settling at the bottom.
• Finish the surface: Continue applying layers until you achieve the desired coverage and effect. This will create the depth and shine of the final finish.

4. Finalizing the Process:

• Drying the paint: Allow the paint to dry for a sufficient amount of time.
• Apply the final clear coat: Once the holographic pigment has dried to the required level for clear coat application, apply one or more clear layers to protect against wear and enhance the shine.

</span ></span >

Tips and Maintenance:

• Regular mixing: Before each spray, mix the mixture thoroughly to prevent the pigment from settling at the bottom of the container.

• Substrate: For the best effect, use a base coat in a similar shade as the substrate.

• Spraying: Never let the paint with the holographic pigment dry completely before applying the next layer, as it may peel later. Follow the instructions in the clear base and clear coat's technical data sheets for their flash-off times. The paint with the holographic pigment must not be wet, but must be dry to the touch and tacky enough to apply the next layer.

Warning: This product is manufactured according to your requirements, weighed, mixed, and dispensed. For this reason, you cannot withdraw from the contract or return the product after ordering.

KolorPearl Holographic Pigment - Silver is an essential addition for anyone seeking uniqueness and perfection. Order yours today and transform your projects into true masterpieces!